Data-One clip Universal Device user manual
WARNING:  PLEASE DO NOT USE DATA-1 TO CHARGE THE BATTERY, USE A NOKIA 3310 PHONE TO CHARGE !!!!
Nokia DCT3 ( Direct unlock ): 2100, 3210, 3310, 3330, 3410, 5210, 5510, 6110, 6130, 6150, 6210, 6250, 
7110, 8210, 8250, 8850, 8890, 9210, 9210-i  and all USA similar models
To unlock Nokia phones by DIRECT UNLOCKING
1 Power on Data ONE.
2 Press Menu.
3 Select Nokia
4 Select DCT3/ DCT4.
5 Connect Data ONE to the Nokia phone via the PS2 connector provide (Connectors for Nokia phones are not supplied)
6 DCT3: Power on the phone and press UNLOCK.
Data ONE will unlock the phone and phone will restart, phone is now unlocked.
7 DCT4: Power the phone on and press UNLOCK.
8 The phone will display TEST MODE to confirm, after a few sec the phone will display insert card, phone is now Unlocked.

Nokia DCT4 ( Direct unlock + Remote Code Calculator ) : 3100, 3200, 3300, 3510, 3510i, 3650, 5100, 6100, 6220, 6310, 
6310i, 6510, 6600, 6610,  6800, 6820, 7210, 7250, 7250i, 7650, 8310,  8910, 8910i N-GAGE and all USA similar models
To unlock Nokia DCT4 phones by IMEI Calculation
1 Repeat step 1 to 3 from above, then select DCT4.
2 Enter the first 14 Digits of the IMEI number.
3 Enter the Network: code. 
(T Mobile = 23430, Orange = 23433, Vodafone = 23415, O2 = 23410 three=23420 )
4 Enter the Simlock type, ASIC:
( All DCT4 Nokia phones are Simlock type = 2,  7650 and 3650 are simlock type = 5,  7600 is simlock type = 7 ) 
5 Press Calculate, Unlocking codes will display on the screen.
6 Enter the complete code via the keypad on the phone,  ( repeat press * to make p w + ) at the beginning and (+1#) at the end. Eg: #pw+123456789012345+1#
( Phone restriction off ) message will display on phone, phone is now unlocked.
7 Always use calculated code 1 and 2 only, if after code 1 has entered and phone is still not unlocked, entering code 2 will unlock the phone.
( 7600 need to use code 7 )
International NETWORK codes can be found on our web page.

To unlock Sony Ericsson phones by DIRECT CODE READER
1 Select ERICSSON from Menu.
2 Connect Data ONE to the Ericsson phone via the PS2 connector and the Sony Ericsson connector provided.
3 Press OK, Unlock codes will be displayed on the screen of Data ONE.
4 Power the phone on, then by pressing < ** < on the handset to access the unlock menu to input the desire code to unlock the phone.
5 If there is more then 1 lock on the phone, ( Padlock closed ), repeat step 4 and enter code.
6 If the USER code is anything other than 0000 or DEFAULT, a simcard has to be inserted to phone to deactivate USER code first before unlocking codes can be entered.
7 You can then reset USER code to 0000 afterwards.

tO UNLOCK MOTOROLA T191 C300
1 Select Motorola from Menu
2 Connect Dataone to the Motorola phone via the headset jack connector  
3 Choose the correct model and press unlock
4 Phone state is off, press the ON key when ask by data1, phone will beep after unlock.

To unlock Panasonic GD67 87 88 phones
1 Connect PS2 cable to Panasonic cable provided for Data ONE Phase II to phone.
2 Phone state is OFF.
3 Select Panasonic from Menu and press OK.
4 Data ONE will ask you to POWER ON PHONE.
5 Press the power on button on phone to enter into TEST MODE.
6 Unlocking codes will be displayed on Data ONE screen.
7 Power on phone with NO simcard and type 746 from keypad and press joystick navigator button TWICE to enter into unlock menu.
8 Scroll down menu and select the HIGHLIGHTED options, eg: NETWORK, ORANGE or SERVICE PROVIDER.
9 Enter codes accordingly and press UNLOCK, repeat if there is more than one unlock code.
10 Test with simcard, USER code will be reset to 0000.

To unlock Sharp GX1 GX10 GX10-i phones.
1 Connect PS2 cable to Sharp cable provided for Data ONE phase II to phone.
2 Phone state is ON.
3 Select Sharp from menu and press OK.
4 The phone will enter Test mode and count down from 3 seconds will display on phone.
5 Phone will turn off, phone now is unlocked, user code is reset to 0000.

To unlock Samsung phones.
1 Connect PS2 cable to correct Samsung cable provided for Data ONE to phone.
2 Phone state is ON or OFF ( depend on phone model )
1 Select Samsung from menu and press OK.( some model will need to switch off phone)
2 Dataone will display UNLOCK when it is ready.
3 Check the phone with a sim card.... ( E710 and E400 use Qxxx setting)

To unlock Siemen phones X4x and x5x
1 Connect PS2 cable to correct Siemen cable provided for Data ONE to 
2 Phone state is Off.
3 Select Siemen from menu and choose correct type then select
4 Press the phone ON key when ask by data1 , the imei will be display
5 Dataone will display UNLOCK when it is ready

To unlock Panasonic GD55 phones by IMEI Calculation
1 Enter the first 14 Digits of the IMEI number.
2 Press calculate
3 Power on phone without sim card, then enter all codes ( try first code 12 and 32 )

To unlock LG phone ( except 7100 and 7050 )
On the LG510 model do the following:
Insert an ACCEPTED SIM card into the phone and switch it on
Type 2945#*5101#MENU 555 then choose network then choose OFF and enter the unlock code shown on the Data One screen next to 510 
Then press OK
On the LG1200B model do the Following:
Insert an ACCEPTED SIM card into the phone and switch it on
Type 1945#*5101# then choose Network then Choose OFF and enter the unlock code shown on the Data One screen next to 1200B
Then press OK
On the LG70xx model do the Following:
Insert an ACCEPTED SIM card into the phone and switch it on
Type 2945#*70001# then choose Setup Menu then Choose Security then Simlock then OFF and enter the unlock code 
Then press OK
Simlock Menu on LG1200B: 1945#*5101#
Simlock Menu on LG510(W), LG5200: 2945#*5101#
Simlock Menu on LG7010 and LG7020: 2945#*70001#
Simlock Menu on LG500 and LG600: 2947#*

To unlock SPV and SPV E100 phone ( If NO LICENSE is display, please contact your supplier for this optional upgrade)
1 Put SPV in test mode by holding the vol key then power on the phone ( 3 colour band will display on phone)
2 Connect the ( option ) SPV / XDA cable to phone and connect the 9v battery to cable
3 choose the SPV menu on data1 then press unlock
4 Screen on the SPV will turn white, after a few more sec, unlocked will display.

To unlock XPV phone ( If NO LICENSE is display, please contact your supplier for this optional upgrade)
1 Put XDA in test mode by holding the RESET  then power on the phone ( 3 colour band will display on phone)
2 Connect the ( option ) SPV / XDA  cable to phone and connect the 9v battery to cable
3 choose the XDA menu on data1 then press unlock
4 Screen on the XDA will turn white, after a few more sec, unlock sucessful will display.

Other makes and models of phones will be implemented to the Data ONE universal device at later dates. 
Dataoneclip.com would like to thank all for purchasing Data ONE universal device
Please check our web site regularly for updates and downloads.
Data ONE universal device remains the product of www.data1clip.com
Contact phil@phoneunlock.com for further support.